絕緣電氣介電擊穿強度測定儀/工頻耐電壓擊穿強度測定儀

一、滿足標準：

1、GB1408.1-2006《絕緣材料電氣強度試驗方法》

2、GB1408.2-2006《絕緣材料電氣強度試驗方法 

        第2部分：對應用直流電壓試驗的附加要求》

3、GB/T1695-2005《硫化橡膠工頻擊穿電壓強度和耐電壓的測定方法》

4、ASTM D149《固體電絕緣材料工業電源頻率下的介電擊穿電壓和介電強度的試驗方法》

二、適用范圍

    主要適用于固體絕緣材料（如：塑料、橡膠、層壓材料、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆、絕緣油等絕緣材料及絕緣件）在工頻電壓或直流電壓下?lián)舸?qiáng)度和耐電壓的測試。

三、軟件功能:

 01、軟件平臺：WINDOWS窗口操作平臺，界面直觀，便于操作

02、曲線顯示：在實驗過程中可以動態顯示試驗曲線

03、數據導出：可以對試驗結果導入EXCEL表格

04、實驗報告：可以人為設置報告名稱，并對實驗報告進行打印

05、試驗方式：可以根據需求對直流試驗和交流試驗進行靈活選擇

06、試驗方法：可以根據需求自行選擇擊穿電壓、耐壓試驗、梯度試驗

07、參數設置：可以根據不同的試驗方式及試驗方法靈活設置所需的不同參數值

08、試樣設置：可對不同標準的試樣參數靈活設置

09、人員管理：設置用戶名及密碼，不同的操作員登入進行不同的試驗，互不影響

10、標準選擇：含有不同標準，可根據需求自行選擇

11、連續操作：連續操作試驗時，可直接在軟件里結束試驗，進行二次試驗

三、技術要求：

01、輸入電壓： 交流220 V

02、輸出電壓： 交流 0--50 KV 

                  直流0—50 KV   

03、電器容量： 3KVA

04、高壓分級： 0--5KV； 0-10KV；0-20KV；0-30KV；0-40KV；0-50KV；

05、升壓速率： 100V/S  200V/S  500V/S  1000V/S 2500V/S 3000V/S 

06、試驗方式：

           直流試驗：1、擊穿試驗 2、梯度升壓  3、耐壓試驗 

           交流試驗：1、擊穿試驗  2、梯度升壓  3、耐壓試驗

07、擊穿判停方式：1、電壓判停 2、電流判停

08、電壓試驗精度： ≤ 1％

09、黃銅電極規格： ￠25mm 兩個   ￠75mm一個

10、主機尺寸：長寬高700*800*1500（MM）

11、操作臺尺寸：長寬高700*800*700（MM）

12、防護罩材質：亞克力

 13、設備重量：約100KG

四、設備安全說明：

1、設備要安裝單獨的保護地線，主要是減少試樣擊穿時對周圍產生的較強的電磁干擾。也可避免控制計算機失控。

2、直流試驗放電報警功能:在設備做完直流試驗時,當開啟試驗門時設備會自動報警,直至使用設備上的放電裝置放電后報警會自動取消.(注：因?yàn)橹绷髟囼?yàn)后不放電會危險到人身安全,不能直接拿取電極,起到提醒使用人員放電以免造成人身傷害)。

3、增配試驗手動放電裝置，隨主機為一體化，當直流試驗過程中突然斷電，可采用手動放電棒進行放電，保證試驗人員的人身安全。

4、該試驗設備的電路設有多項保護措施，主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電保護等。

五、配置

絕緣電氣介電擊穿強度測定儀/工頻耐電壓擊穿強度測定儀軟件截圖

English introduction英文簡介

One, meet the standards:

1、GB1408.1-2006《絕緣材料電氣強度試驗方法》

1, GB1408.1-2006 "of electrical insulation strength material test method"

2、GB1408.2-2006《絕緣材料電氣強度試驗方法

Methods of test for electric strength of insulating material 2, GB1408.2-2006 "

第2部分：對應用直流電壓試驗的附加要求》

The second part: Additional requirements for tests using direct voltage "

3、GB/T1695-2005《硫化橡膠工頻擊穿電壓強度和耐電壓的測定方法》

3, GB/T1695-2005 "vulcanized rubber power frequency voltage breakdown strength and voltage resistance determination method"

4、ASTM D149《固體電絕緣材料工業電源頻率下的介電擊穿電壓和介電強度的試驗方法》

Test methods of solid electrical insulating materials industrial power frequency dielectric breakdown voltage and dielectric strength of 4, ASTM "D149"

二、適用范圍

Two, applicable scope

主要適用于固體絕緣材料（如：塑料、橡膠、層壓材料、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆、絕緣油等絕緣材料及絕緣件）在工頻電壓或直流電壓下?lián)舸?qiáng)度和耐電壓的測試。

Mainly applicable to solid insulation materials (such as: plastic, rubber, lamination material, film, resin, mica, ceramic, glass, insulating paint, insulating oil, insulating materials and insulation) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.

三、軟件功能:

Three, the software function:

01、軟件平臺：WINDOWS窗口操作平臺，界面直觀，便于操作

01, the software platform: WINDOWS windows operating platform, intuitive interface, easy operation

02、曲線顯示：在實驗過程中可以動態顯示試驗曲線

02, curve display: during the experiment can dynamically display the test curve

03、數據導出：可以對試驗結果導入EXCEL表格

03, export data: the results of test can be imported into EXCEL table

04、實驗報告：可以人為設置報告名稱，并對實驗報告進行打印

04, the experiment report: can be artificially set report name, and print the test report

05、試驗方式：可以根據需求對直流試驗和交流試驗進行靈活選擇

05, test mode: can flexibly select the DC test and AC test according to the demand of

06、試驗方法：可以根據需求自行選擇擊穿電壓、耐壓試驗、梯度試驗

06, test method: you can choose the breakdown voltage, voltage withstand test, gradient test according to the demand of

07、參數設置：可以根據不同的試驗方式及試驗方法靈活設置所需的不同參數值

07, setting of parameters: according to the different parameters in different ways and test methods flexibly set the required value

08、試樣設置：可對不同標準的試樣參數靈活設置

08, sample setting: can the sample parameters of different standard flexible settings

09、人員管理：設置用戶名及密碼，不同的操作員登入進行不同的試驗，互不影響

09, personnel management: set the user name and password, different operators in different test, do not influence each other

10、標準選擇：含有不同標準，可根據需求自行選擇

10, the standard choice: containing different standard, according to their needs

11、連續操作：連續操作試驗時，可直接在軟件里結束試驗，進行二次試驗

11, continuous operation: continuous operation test, can finish the test in the software, test two times

三、技術要求：

Three, the technical requirements:

01、輸入電壓： 交流220 V

01, the input voltage: AC 220 V

02、輸出電壓： 交流 0--50 KV

02, the output voltage: AC 0--50 KV

直流0—50 KV

DC 0 - 50 KV

03、電器容量： 3KVA

03, electrical capacity: 3KVA

04、高壓分級： 0--5KV； 0-10KV；0-20KV；0-30KV；0-40KV；0-50KV；

04, high grade: 0--5KV; 0-10KV; 0-20KV; 0-30KV; 0-40KV; 0-50KV;

05、升壓速率： 100V/S 200V/S 500V/S 1000V/S 2500V/S 3000V/S

05, the rate of pressure rise: 100V/S 200V/S 500V/S 1000V/S 2500V/S 3000V/S

06、試驗方式：

06, test methods:

直流試驗：1、擊穿試驗 2、梯度升壓 3、耐壓試驗

DC test: 1, 2, 3 breakdown test pressure gradient, pressure test

交流試驗：1、擊穿試驗 2、梯度升壓 3、耐壓試驗

AC test: 1, 2, 3 breakdown test pressure gradient, pressure test

07、擊穿判停方式：1、電壓判停 2、電流判停

07, breakdown judgment stop mode: 1, voltage, current judge sentenced 2 stop stop

08、電壓試驗精度： ≤ 1％

08, voltage test accuracy: ≤ 1%

09、黃銅電極規格： ￠25mm 兩個 ￠75mm一個

09, brass electrode specifications: - 25mm two - 75mm a

10、主機尺寸：長寬高700*800*1500（MM）

10, host size: length and width and height of 700*800*1500 (MM)

11、操作臺尺寸：長寬高700*800*700（MM）

11, operation table size: 700*800*700 long width height (MM)

12、防護罩材質：亞克力

12, the protective cover material: acrylic

13、設備重量：約100KG

13, weight: about 100KG

四、設備安全說明：

Four, equipment safety instructions:

1、設備要安裝單獨的保護地線，主要是減少試樣擊穿時對周圍產生的較強的電磁干擾。也可避免控制計算機失控。

1, equipment to install a separate protective ground, mainly is the strong electromagnetic interference to reduce the sample breakdown when the surrounding the. Also avoid control computer control.

2、直流試驗放電報警功能:在設備做完直流試驗時,當開啟試驗門時設備會自動報警,直至使用設備上的放電裝置放電后報警會自動取消.(注：因?yàn)橹绷髟囼?yàn)后不放電會危險到人身安全,不能直接拿取電極,起到提醒使用人員放電以免造成人身傷害)。

2, DC discharge alarm function: the equipment finished DC test, when opening the door will automatically alarm test device, discharge device discharge until use on the device after the alarm will be automatically cancelled. (Note: because the DC test and not put electricity danger to personal safety, can not directly take electrode, a reminder to use staff in order to avoid personal injury) Adult discharge.

3、增配試驗手動放電裝置，隨主機為一體化，當直流試驗過程中突然斷電，可采用手動放電棒進行放電，保證試驗人員的人身安全。

3, with the test manual discharging device, with the host for the integration, when sudden power DC test process, can be manually discharging rod discharge test, to ensure personal safety.

4、該試驗設備的電路設有多項保護措施，主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電保護等。

Circuit 4, the test equipment is provided with a number of protective measures, mainly include: over current protection, under voltage protection, leakage protection, short-circuit protection, DC discharge protection etc..

The electrical properties of China aerotime and common instrument of insulating material

ZWN萬能材料試驗機

ZWN universal material testing machine

ZJC-10KV-200KV電壓擊穿試驗儀

ZJC-10KV-200KV voltage breakdown tester

ZST-121體積表面電阻率測定儀

Determination of ZST-121 volume and surface resistivity instrument

ZTS-121碳素材料電阻率測試儀

ZTS-121 carbon material resistivity tester

ZST-122電線電纜導體半導體材料電阻率測試儀

Instrument cable conductor semiconductor material resistivity ZST-122

M-200橡膠塑料滑動摩擦試驗機（國標，非國標，可定制）

M-200 rubber plastic sliding friction testing machine (GB, non standard, can be customized)

ZJD-A介電常數介質損耗測試儀（可測試固體液體）

ZJD-A dielectric loss tester (testing of solid liquid)

ZJD-B學校介電常數介質損耗測試儀

ZJD-B school special dielectric loss tester

ZJD-C高頻介電常數介質損耗測試儀

ZJD-C high frequency dielectric loss tester

ZJD-50HZ-100HZ工頻介電常數介質損耗測試儀

ZJD-50HZ-100HZ frequency dielectric loss tester

ZDH-20KV絕緣材料耐電弧性能試驗儀/高電壓小電流測試儀

Arc resistance tester / high voltage low current tester ZDH-20KV insulating material

ZWK-300A液顯熱變形維卡軟化點溫度測定儀

ZWK-300A liquid heat deformation temperature of VEKA softening point tester

ZWK-300B計算機控制熱變形維卡溫度試驗機

VEKA ZWK-300B computer control thermal deformation temperature testing machine

ZWK-500計算機控制熱變形維卡溫度試驗機

VEKA ZWK-500 computer control thermal deformation temperature testing machine

ZQYH-96塑料球壓痕硬度計

ZQYH-96 plastic ball indentation hardness tester

ZRT-400Z熔體流動速率測定儀/熔融指數儀

ZRT-400Z melt flow rate meter / melt index apparatus

ZMD-A計算機控制馬丁耐熱試驗儀

ZMD-A computer control Martin heat resistance tester

☆中航時代燃燒性能儀器

☆ China aerotime combustion performance instrument

ZRS-3水平垂直燃燒試驗儀

ZRS-3 horizontal and vertical burning tester

ZDG-1000單根電線電纜垂直燃燒試驗儀

ZDG-1000 vertical burning test instrument of single wire and cable

ZLD-600V漏電起痕試驗儀

ZLD-600V tracking test apparatus

ZLD-6000V高壓漏電起痕試驗儀

ZLD-6000V high voltage tracking test apparatus

ZKR-A建材可燃性試驗爐

ZKR-A building materials flammability test furnace

ZBR-B建材不燃性試驗爐

ZBR-B building materials not combustion test furnace

ZZR-A汽車內飾材料阻燃性能試驗機

Flame retardant properties of automotive interior materials testing machine ZZR-A

ZY-A針焰試驗儀

ZY-A needle flame test apparatus

ZR-A灼熱絲試驗儀

ZR-A glow wire test apparatus

ZDR-C導熱系數測定儀

Determination of ZDR-C thermal conductivity coefficient instrument

☆中航時代海綿泡沫檢測儀器

☆ China aerotime sponge foam detecting instrument

ZYX-2000海綿泡沫壓陷硬度測定儀

ZYX-2000 sponge foam indentation hardness tester

ZLQ-500海綿泡沫落球回彈儀

ZLQ-500 sponge foam ball rebound tester

ZPL-2000海綿泡沫疲勞沖擊測定儀

ZPL-2000 sponge foam fatigue impact tester

ZLS-1000海綿拉伸強度試驗機

ZLS-1000 sponge tensile strength testing machine

ZYS-200海綿壓縮*變形試驗機

Compression testing machine ZYS-200 sponge

ZQG-500海綿泡沫切割機

ZQG-500 sponge foam cutting machine

ZMD-A海綿密度測定儀

ZMD-A sponge density measuring instrument

ZYZS-C氧指數測定儀

ZYZS-C oxygen index tester

ZR-B海綿泡沫阻燃性能試驗箱

Test box flame retardant sponge foam properties of ZR-B

☆中航時代沖擊試驗機系類

☆ China aerotime impact testing machine series

ZWD系類低溫脆性試驗機（單試樣、多試樣）

ZWD series of brittle - temperature testing machine (single specimen, multiple sample)

ZJZL-A簡支梁沖擊試驗機（指針，數顯）

ZJZL-A Charpy impact testing machine (pointer, digital display)

ZXBL-A懸臂梁沖擊試驗機（指針，數顯）

ZXBL-A cantilever beam impact testing machine (pointer, digital display)

ZJX-A簡支梁懸臂梁組合沖擊試驗機（指針，數顯）

ZJX-A simply supported cantilever beam combination impact testing machine (pointer, digital display)

ZLC-2000落球沖擊試驗機

ZLC-2000 falling ball impact test machine

ZLB-30管材落鏢沖擊試驗機

ZLB-30 pipe falling dart impact tester

BCM-03擺錘薄膜沖擊試驗機

Pendulum impact testing machine of BCM-03 thin films

ZJS-300A金屬擺錘沖擊試驗機

ZJS-300A metal pendulum impact testing machine

ZJS-300B全自動低溫沖擊試驗機

ZJS-300B automatic temperature impact test machine

☆中航時代制樣機系類

☆ China aerotime system prototype system

ZWN-A萬能制樣機

The ZWN-A universal machine

ZQK-A手動缺口制樣機

ZQK-A manual gap system prototype

ZQK-B自動缺口制樣機

ZQK-B automatic gap system prototype

ZYL-A手動啞鈴型制樣機

ZYL-A manual dumbbell system prototype

ZQK-B自動啞鈴型制樣機

ZQK-B automatic dumbbell system prototype

沖片機（氣動、液壓）

Punching machine (pneumatic, hydraulic)

☆中航時代環境試驗箱系類

☆ China aerotime environmental test box series

ZJB-C高低溫交變?cè)囼?yàn)箱

ZJB-C alternating high and low temperature test box

ZQH-C人工氣候箱

ZQH-C artificial climate box

ZLH-A老化試驗箱

ZLH-A aging test box

ZWS-02高低溫試驗箱

ZWS-02 high low temperature test box

ZYZS-C氧指數測定儀

ZYZS-C oxygen index tester

☆售后服務

☆ after sale service

一、安裝調試：協助試驗機的安裝，負責試驗機的運輸、調試。

A, installation debugging: assist testing machine installation, transportation, commissioning test machine.

二、驗收標準：試驗機按訂貨技術附件進行驗收。終驗收在買方進行，對用戶提供的試樣進行試驗，并提供測試報告。

Two, acceptance criteria: testing machine for acceptance according to the order of the technical annex. Final acceptance in the buyer, sample provides to the user testing, and provide the test report.

三、培訓：安裝調試同時，在儀器操作現場一次性免費培訓操作人員2-3名，該操作人員應是由需方選派的長期穩定的員工，培訓后能夠?qū)υO(shè)備基本原理、軟件使用、操作、維護事項理解和應用，使人員能夠獨立操作設備對樣

Three, training: installation at the same time, the instrument operation on-site one-time free training 2-3, the operating personnel shall be appointed by the long-term stability of the staff, training to basic principle, software use, operation, maintenance and application of understanding, so that workers can operate independently of the kind of equipment

品進行檢測、分析，同時能進行基本的維護。

Product testing, analysis, and can perform basic maintenance.

四、軟件升級：終生免費提供新版本控制軟件。

Four, software upgrade: free lifetime provides new version control software.

五、保修：

Five, the warranty:

1、設備保修兩年，終身售后服務，一年內非人為損壞的零部件免費更換，保修期內接到用戶邀請后， zui遲響應時間為2小時內，在與用戶確認故障后，我公司會在48小時內派工程師到達現場進行免費服務，盡快查清故障所在

1, equipment warranty of two years, lifetime after sale service, within one year of the non-human damage parts replaced free of charge, the warranty period the user received the invitation, but the response time is 2 hours, with user confirmation after a failure, I will send engineers arrived at the scene to carry out free service in 48 hours, as soon as possible to identify the fault location

位置和故障原因，并向用戶及時報告故障的原因和排除辦法 。

Location and fault reason, reason and to users timely report failures and troubleshooting.

2、保修期內人為損壞的零部件按采購（加工）價格收費更換。

2, the warranty period of man-made damaged parts procurement according to the price of replacement (processing).

3、保修期外繼續為用戶提供優質技術服務，在接到用戶維修邀請后3天內派工程師到達用戶現場進行維修。并享有優惠購買零配件的待遇。

3, the warranty period to continue to provide high-quality technical services for the users, to invite users to repair within 3 days after the arrival of the user site to send engineers to repair. And enjoy the preferential purchase of spare parts.

4、傳感器過載及整機電路超壓損壞不在保修范圍內。

4, the sensor and the circuit overload overpressure damage not covered under warranty.

六、售后管理：

Six, customer service management:

我公司實現計算機化管理，實行客戶定期回訪制度，定期復查設備的工作情況，定期指導用戶對設備進行保養和檢測，以便設備正常運轉，跟蹤客戶的設備使用情況，以便及時對設備進行維護。

Our company to realize the computer management, carry out customer regular ephone return visit system, work regular examination equipment, regular ephone guide users to maintain and test the equipment, so that the normal operation of equipment, track customer equipment usage, so that timely equipment for maintenance.